Guaranteed
Certificated Business
On Request
A Thorough Examination
Within The Industry
Some so-called “Thorough” Examinations only inspect a forklift’s lifting mechanism, doing the bare minimum to comply with LOLER 98 (shown in blue below). However, you also have a responsibility under PUWER 98 to ensure the equipment is safe to use – which requires a far more comprehensive inspection (including the items highlighted in red). A CFTS Thorough Examination guarantees both aspects are covered.
Hover your mouse over any part of the truck below to see which regulation applies to that specific section of the vehicle. For instance, would you want to use a truck that hadn’t had its brakes inspected?
Mast and Reach Carriage
The mast and reach carriage must be inspected throughout its full range of movement to ensure smooth, safe operation and structural integrity.
Chains
Lift chain failure is potentially lethal, but the wear, elongation or corrosion that can cause it are gradual, and tricky to spot: a change of just 2% is a cause for concern. Chains must therefore be checked carefully, in at least three places, along with anchors and pulleys.
Controls
As well as the controls themselves, which must all be fully functional, securely mounted and clearly marked, all linkages and cables must be inspected to prevent potential failure through damage, corrosion or wear.
Hydraulic Systems
The hydraulic check is a major task, covering all hoses, pipes, cylinders and reservoir, along with a prolonged load test to rule out unacceptable descent. Filters are also inspected, for any signs of debris
Attachment/Side Shift (if present)
Any attachment or sideshift must operate smoothly and safely throughout the full range of its movement. It should be mounted securely, and free from damage, distortion and cracks.
NB: attachments and sideshifts that are permanently fitted are included in a truck's usual Thorough Examination schedule. Ones that can be removed must have a full examination at least twice a year. For clarification, please ask your CFTS accredited examiner
Tilt Mechanism
To enable safe operation, the tilt must move in an even, controlled way. It must also be checked for damage and scoring, which can indicate more serious issues.
Carriage
The fork arm carrier must be free from distortion and cracking, and any load rest extension must be sound and properly mounted.
Rating Plate
Clear rating information is absolutely critical to the safe operation of any fork lift truck. The plate must be clear, securely attached, and updated to take account of any attachments or side-shifts fitted.
Forks
Fork arms are subject to constant abrasion and stress, making them particularly vulnerable. They must be of the correct capacity, meet ISO 5057 for wear, and must not be cracked, deformed or damaged. Fork location and end stops are also checked.
Overhead Guard/Cab
As well as compromising protection from falling loads, a damaged overhead guard can be a clue to potentially lethal structural problems. The guard must therefore be sound and securely mounted. Finger guards must be in place and secure to prevent crush injuries. *may not be checked in a non-CFTS examination*
Traction
A CFTS examination includes the prime mover and transmission. Special attention is given to the travel pedal as they often seize due to excessive dirt/debris.As well as the engine, the exhaust system is also checked. This check is critical on trucks with allwheel drive systems. *may not be checked in a nonCFTS examination*
Brakes
Brake failure is a fork lift truck operator's worst nightmare, but brakes are left unchecked in many inspections.A CFTS examination covers both service and parking brakes – checking all hydraulics, pneumatics, mountings, pedals, levers and linkages to ensure the brakes operate exactly as expected. *may not be checked in a non-CFTS examination*
Wheels
Because of the forces involved, wheel failure not only causes accidents, but can be a fatal hazard in its own right. CFTS Thorough Examination ensures wheels and assemblies are sound and securely fixed. Bearings are given special attention. *may not be checked in a non-CFTS examination*
Tyres
Tyres are essential for safe and efficient operation. They provide grip for movement and braking and an element of suspension for safety and comfort, especially on rough terrain. CFTS accredited Thorough Examinations are guaranteed to check the tyres are correctly specified and fitted, and free from excessive wear, damage, or bonding issues. *may not be checked in a non-CFTS examination*
Safety Systems
Safety systems can only protect workers if they operate correctly. Moreover, because operators come to depend on them, any failure can instantly cause serious unsafe practices. Any audible alarms, lights, mirrors and visible warnings are checked, along with interlocks and seat switches if present. Capacity and data plates must also be present, secure and easy to read. *may not be checked in a non-CFTS examination*
Structural Fastenings
Important structural fastening components, such as those holding axles, fluid reservoirs and batteries, must be secure and undamaged. *may not be checked in a non-CFTS examination*
Chassis
The chassis is inspected for cracking and signs of damage, with particular attention paid to the welds. *may not be checked in a non-CFTS examination*
Seat Mounting
The seat mounting must be absolutely secure, along with the panel where it is attached. Any antivibration mechanism is also checked for signs of damage. *may not be checked in a non-CFTS examination*
Driver Restraint
Any operator restraint – including seat belts and any other devices designed to keep the operator safely seated in the event of a tipping accident – is checked to ensure it is fully functional and free from damage. *may not be checked in a non-CFTS examination*
Steering
To ensure the truck can be operated safely, all mechanical and hydraulic steering parts are inspected for signs of failure, corrosion, damage or excessive wear. Proper steering response is confirmed by manoeuvring the truck at low speed. *may not be checked in a non-CFTS examination*
Multy Lift Forktrucks Ltd are the Midlands leading Mitsubishi Forklift Dealer.
Please browse our website and contact us should you have any questions.
Multy Lift Forktrucks Limited was founded in 1986 in the Midlands and is still a family run/privately owned business offering outstanding local service backed by a Global Brand.
Multy Lift is recognised as one of the UK’s largest independent Forklift Truck Dealers stocking the entire range of Mitsubishi Material Handling Equipment.
Not only do we supply new Mitsubishi equipment, we also stock a wide range of competitively priced Used Material Handling Equipment available for purchase, contract rental or short term hire.
Copyright © 2025 – Multy-Lift Forktrucks Limited – Reg: 02654023
Website by Kumo.